QM INDUSTRIES QVPA28V500SN Mounted Units & Inserts

Distance J:1.6250 in; Dimension L:2.7500 in; Dimension S1:0.7813 in; Pin Dia BS:3/8; Basic Dynamic Radial Load Rating:2520 lbf; Distance H:1.125 in; Shaft Diameter D:1 in; Weight W:0.70 lb; Basic Static Radial Load Rating Co:1750 lbf; Dimension B:4.7500 in;

Basic Dynamic Radial Load Rating C:325000 N; Oil Speed Rating n2:3000 rpm; Fillet Radius ra:2.50 mm; D:200.0000 mm; B:90.00 mm; d:95.000 mm; Grease Speed Rating n1:2600 rpm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:360000 N;

PG:1/4 NPT; Lock washer:W 32; Labyrinth ring (dc shaft position):LOR 142; H:338.137 mm; Ca:89.789 mm; S:4.763 mm; Initial grease fill:793.8 g; P90°:207 kN; PosiTrac Plus contact element (db shaft position):B10724-155; Stabilizing ring:SR-32-0;

Limiting speed:800 r/min; Dw:25 mm; Mass roller and cage thrust assembly:8.48 kg; Roller and cage thrust assembly:K 81168 M; Shaft washer:WS 81168; Fatigue load limit Pu:355 kN; Reference speed:380 r/min; D:420 mm; Housing washer:GS 81168; Ea:354 mm;

B4:19 mm; Locking device:MB 19; Hydraulic nut:HMV 19 E; B1:55 mm; G:M 95x2; Lock nut:KM 19; B:17 mm; Mass adapter sleeve assembly:1.35 kg; d:95 mm; d1:82.55 mm;

h:96.5 mm; Tolerance housing:H7; Coefficient of friction µ max.:0.15; Tolerance shaft:e7; Permissible sliding velocity v max.:0.5 m/s; d:95 mm; Specific static load factor K0:45 N/mm²; Mass bushing:2.3 kg; Permissible sliding velocity v min.:0 m/s; B:80 mm;

Limiting value e:0.3; D1 ≈:60.2 mm; Reference speed:10000 r/min; r1,2 min.:1.1 mm; ra max.:1 mm; Axial load factor Y:0.4; C:23 mm; Calculation factor kr:0.2; Fatigue load limit Pu:8.15 kN; Limiting speed:12000 r/min;

Basic Static Radial Load Rating Co:300000 N; B:56.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:7600 rpm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:5100 rpm; d:150.000 mm; D:210.0000 mm; Basic Dynamic Radial Load Rating C:203000 N;

Calculation factor Y2:2.7; Fatigue load limit Pu:9.65 kN; Mass bearing pair:0.48 kg; Da max.:56 mm; r3,4 min.:1 mm; r5 min.:0.3 mm; Calculation factor e:0.37; Calculation factor Y1:1.8; K:3 mm; 2B:32 mm;

Appropriate attachment bolt size G:1 in; End plug (suffix Y):EPR 16; A1:158.75 mm; Cap bolt recommended tightening torque:813.5 N·m; Initial grease fill:623.7 g; Housing:SAFS 530; Cap bolt, SAE grade:8; A2:215.9 mm; P150°:136 kN; H:317.5 mm;

B:18 mm; B1:3 mm; Tolerance housing:H7; d:18 mm; D1:30 mm; Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ max.:0.1; D:24 mm;

Housing material:Cast iron; B:49.2 mm; Thread grub screw G2:5/16-24 UNF; L:111 mm; Mass bearing unit:1.85 kg; J:148.5 mm; H:178.5 mm; A3:3.2 mm; Basic dynamic load rating C:33.2 kN; A5:23 mm;

Nut for removal:KM 40; G:M 200x3; B1:125 mm; G1:20 mm; Mass withdrawal sleeve:4.48 kg; B2:131 mm; Hydraulic nut:HMV 40 E; d:190 mm; d1:180 mm;

Basic Dynamic Radial Load Rating C:95600 N; Basic Static Radial Load Rating Co:83000 N; Grease Speed Rating n1:3800 rpm; D:120.0000 mm; Oil Speed Rating n2:5000 rpm; Fillet Radius ra:2.00 mm; B:49.20 mm; d:55.000 mm;

Hydraulic nut:HMV 16 E; B:18 mm; d1:70 mm; d3:105 mm; G:M 80x2; Lock nut:KMFE 16; Mass adapter sleeve assembly:1 kg; d:80 mm; B1:59 mm;